1) IPS LCD screen. Small amount of shell cutting, simple installation.No soldering is required.
2) Touch to adjust brightness and change color. Short touch is to adjust backlight brightness, long touch is to change color. Black and white, retro, green, dark yellow, bright yellow, five color options.
3) The screen display scale is correct, 4 points to 1 point.
4) The size of the display screen is the same as the original one, and the original lens can be used.
1) For aftermarket shells, check the window for burrs. Remove the burrs.
2) Cut the housing as shown.
3) Add double-sided adhesive for the LCD screen, it can be any ordinary double-sided tape.
4) The LCD screen can be aligned to the upper right corner.
5) Pay attention to fully insert the LCD cable and fasten the cable base.
The exposed metal wire shall not touch any metal other than the power supply, or it will cause short circuit, the battery will be very hot, and the LCD screen will not work.
the solder joint of the wire is relatively small. If it falls off, you need to solder it yourself.
The cable for touch adjustment of LCD brightness and color must touch the shell.
Please test the backlight before installing. Backlight kits that show any sign of being installed are not eligible for returns or refunds.